Building Green With Oceansafe SIPs
Passive House (Passivhaus) building standards were first developed in Germany during the 1990s to reduce buildings’ heating energy consumption. While rare in the U.S., Europe has adopted the practices in thousands of single-family homes, residences, schools, office buildings and other structures that have been created or remodeled. With Passive House, energy consumption may be reduced by as much as 90% when compared to typical construction methods.
Such increased efficiency is essentially achieved by boosting insulation, closing air leaks and preventing thermal bridging, while using passive solar and captured human warmth and heat from equipment through SIPs (Structurally Insulated Panels). SIPs are composed of expanded polystyrene (EPS) and Oriented Strand Board (OSB). They furnish the tight building envelope and superior insulation required by Passive House criteria, and meet the goals of other highly energy-efficient buildings. This strategy is being implemented in our Viridian Future project.
OceanSafe, founded in 2004 by Vincent Basilice in response to Gulf Coast hurricane damages, is a New York-based manufacturer of high performance SIPs, boasting innovative materials, products and design to meet these green standards. Oceansafe SIPs deliver superior thermal performance because they’re used for exterior load-bearing and interior partition walls, roof and floor systems. Immediate benefits are:
- Low construction cost
- High energy-efficiency
- Increased resistance to natural disaster
- Quick, easy assembly (with minimal waste)
- Green construction (from recycled materials)
Oceansafe panels also can be used to retrofit existing buildings or for any new industrial, commercial or home construction. In addition, they may replace all existing, standard housing components, and they are structurally self-sufficient, spanning greater distances as well.
There are multiple lines, also, as outlined and typified below:
Structural Line 1—requiring, on average, a quick two-week assembly with competitive cost-effective construction, suitable for traditional wall assemblies; an example using the line is New Orleans’s Woodward A. Wright firm’s building;
Architectural Line 2—the premier pre-finished panel, delivering a full thermal and weatherization system; examples include two Brooklyn structures, one a multi-family residence; and the third a Camden, NJ, recycling plant;
Fireproof Line 3—easy to handle, used as an exterior and interior surface designed to be for structures greater than four stories; includes a NAPA auto parts building in the Northeast (built to withstand adverse weather).
Since Viridian Future is a Townhouse, panels will be in the following places: all of the south walls fourth and fifth floor north wall, the side-walls of penthouse. The south wall panels are some 2,000 pounds, which presents a challenge for installation in the middle of Manhattan with “party walls” (other brownstones on each side).
Oceansafe SIPs function via design innovations—their foam insulation lies on the exterior of the building, which reduces the thermal bridging that typifies cavity wall building by offering a tight envelope. With foam-to-foam contact, an excellent thermal shield also is created, which prevents any heat transfer. In addition, the SIPs feature improved structural integrity due to their internal makeup and connections: galvalume steel or magnesium oxide sheets with an interlocking tongue-and-groove or slip-joint system. These provide exceedingly strong structural integrity to withstand extreme weather, and a continuous wall, roof and floor system.
As relates to Passive House models, Oceansafe SIPs offer boons to both buyers and builders. Clients receive the benefits of: 1. An extremely strong structure (made to withstand extreme weather); 2. Lower energy bills (between 58%-72% savings); 3. Increased comfort with steady temperatures and acoustic insulation; 4. Improved air quality and a better environmental footprint with sustainable means (can operate during power outages); and 5. Superb product warranty.
For builders, the positives include:
- Rapid construction with fewer framers (one lead accompanied by minimally skilled aides)
- A rigid frame, with less jobsite waste and theft
- Cost-competitive assembly and an easier method of hanging drywall
- Reliability: once set, SIPs do not warp, crack or twist
Passive House standards meet heating and ventilation needs in a holistic fashion that minimizes energy losses while maximizing energy gains. As a result, such constructions may not require a furnace—a leap forward in efficiency. American experimental findings have shown that during blower door tests, a properly SIP-insulated room was 15 times more airtight than others built with conventional wood framing (leakage rate of 8 cubic feet per minute at 50 pascals compared to 121 CFM50). Oceansafe constructions offer all the benefits of such standards, while being adaptable to various kinds of buildings. They may be used for commercial space, custom home/residential construction and classrooms (via the company’s Schoolhouse ELF—Efficient, Lightweight, Fast—model).
Structures built with Oceansafe technology will withstand hurricanes and earthquakes. They are resistant to fire, mold and insects and termites, and they are assembled quickly, while remaining low-maintenance, with maximal energy efficiency and relatively low cost. While it would seem that Passive House standards are the future of green construction in America, offering the most benefit for people living and working within the constructions themselves, Oceansafe SIPs show that the future is present now through buildings that are literally made more responsibly, efficiently and durably.
Soon, there will be a SIPs event, a lecture and install, toward the end of September, so check back here for updates.
– Alessia Pilloni








